MYcell M80 PVC Foam Core Sheet — 80kg/m³ Structural Sandwich Core
High resistance. Low weight. Built for serious sandwich structures.
MYcell M80 PVC foam core is Maricell’s standard closed-cell, cross-linked PVC foam at 80kg/m³ density — and it delivers the strength-to-weight ratio that makes it the practical choice for lightweight sandwich structures. Specifically, it suits marine, wind energy, aerospace, and automotive applications where mechanical performance and weight efficiency both matter. Furthermore, it’s compatible with epoxy, polyester, and vinyl ester resin systems, and suited to vacuum infusion, hand layup, prepreg, and resin transfer moulding.
Why MYcell M80 Works in Structural Sandwich Applications
Closed-cell cross-linked PVC foam performs differently from open-cell alternatives. Specifically, the closed-cell structure keeps resin uptake low — which means the core contributes to laminate stiffness without absorbing resin and adding dead weight to the sandwich.
At 80kg/m³, moreover, M80 sits in the mid-density range of the MYcell M series. Consequently, it balances mechanical performance and weight efficiently — delivering genuine shear and compressive strength without the mass penalty of higher density grades.
Furthermore, MYcell M80 is easily thermoformable. As a result, it suits curved panel applications and complex geometry builds where a rigid core would require kerfing or hot forming to achieve the required shape.
Key Performance Advantages
- Closed-cell cross-linked PVC — low resin uptake and low water absorption throughout the service life of the laminate
- 80kg/m³ density — mid-density grade that balances structural performance and weight across a wide range of sandwich applications
- Superior shear and compression strength — 1.20 MPa shear strength and 1.60 MPa compressive strength for reliable structural performance
- Excellent strength-to-weight ratio — high mechanical performance per kilogram of core weight
- Easily thermoformable — conforms to curved and compound surfaces without kerfing or excessive heat
- Self-extinguishing — meets fire safety requirements for marine, aerospace, and transport applications
- Wide resin compatibility — works with epoxy, polyester, and vinyl ester without primer or surface treatment
- DNV type approved — independently certified for marine structural applications
Typical Applications
MYcell M80 PVC foam core is used wherever lightweight sandwich construction needs to deliver reliable structural performance across demanding service conditions:
- Marine & Boat Building — hull skins, deck panels, bulkheads, and structural sandwich panels on production and custom vessels
- Wind Energy — blade shells, spar webs, and structural sandwich components in wind turbine manufacture
- Aerospace & UAV — structural sandwich panels, fuselage skins, and non-primary structural components on professional UAV and aerospace platforms
- Automotive & Transportation — lightweight structural panels, floor systems, and body components on commercial and performance vehicles
- Sports & Leisure — high-performance sandwich structures on watercraft, bicycles, and sporting equipment
- Industrial Applications — structural panels, enclosures, and load-bearing sandwich components in industrial equipment and infrastructure
Technical Specifications
| Property | Standard | Unit | M80 |
|---|---|---|---|
| Density (min) | ISO 845 | kg/m³ | 80 (72) |
| Compressive Strength | ISO 844:2014 B | MPa | 1.60 |
| Compressive Modulus | ISO 844:2014 B | MPa | 97 |
| Shear Strength | ISO 1922 | MPa | 1.20 |
| Shear Modulus | ISO 1922 | MPa | 30 |
| Shear Elongation at Break | ISO 1922 | % | 19 |
| Tensile Strength | ASTM D 1623 | MPa | 2.74 |
| Tensile Modulus | ASTM D 1623 | MPa | 146 |
| HDT | DIN 53424 | °C | 125 |
| Compatible Resins | — | — | Epoxy, Polyester, Vinyl Ester |
| Processing Methods | — | — | Infusion, Hand Layup, Prepreg, RTM |
| Certification | — | — | DNV Type Approved |
Data based on laboratory tests and given as typical values only. Contact Enhanced Composites for current batch datasheets.
Available Formats
| Format | Dimensions | Thickness Options |
|---|---|---|
| Full Sheet | 2180mm x 1020mm | 5mm / 10mm / 20mm |
| Half Sheet | 1020mm x 1080mm | 5mm / 10mm / 20mm |
Select thickness and sheet size from the dropdown. Sold per sheet.
Why Enhanced Composites
Enhanced Composites stocks MYcell M80 PVC foam core as a live inventory line in both full and half sheet formats across three standard thicknesses. Furthermore, the range extends across MYcell M and F grade densities — so the full laminate schedule, from reinforcement fabrics through to core and resin systems, comes from one account.
Trade pricing is available for customers buying at volume. Moreover, no minimum order applies on standard sheet sizes — so sampling a thickness before committing to a production run is straightforward.
Need a specific thickness, custom cut, or bulk pricing? Email info@enhancedcomposites.com.au
Carbon Fibre Twill Cloth: 2x2 Twill Carbon Fibre 200gsm 3K
Sealant tape - Yellow - 7.62m 