Nylon Peel Ply 85gsm: Red Stripe Release Fabric
A clean, bondable surface straight off the laminate.
Nylon peel ply 85gsm with a red stripe is a woven release fabric that sits on the outer surface of a laminate during cure. You peel it away afterwards and leave a clean, textured finish. As a result, the surface is ready for bonding, painting, or fairing without heavy sanding. Furthermore, the red stripe makes the ply easy to identify on the roll and on the part.
Why Use Nylon Peel Ply?
Cured resin leaves a glossy, sometimes contaminated surface. Consequently, secondary bonds and paint can fail if you skip surface prep. Peel ply solves that problem. When you remove it, you expose fresh, uncontaminated resin with a fine texture that adhesives grip well.
Nylon suits this job for several reasons. The tight weave leaves a consistent pattern, and the fabric releases cleanly from epoxy, polyester, and vinyl ester. Moreover, it conforms well to curves, so it lays flat on shaped parts.
At 85gsm, the ply is light and easy to cut. In addition, it wets through enough to stay in place under vacuum, yet it still peels away cleanly.
Key Performance Advantages
- Bondable surface: leaves a fresh, textured finish for adhesives, paint, and fairing
- Clean release: peels away from cured epoxy, polyester, and vinyl ester laminates
- Red tracer stripe: helps you identify the ply and spot leftover fabric
- 85gsm weight: light, flexible, and easy to cut and lay
- Good conformability: drapes over curves and complex shapes
- Consistent texture: tight nylon weave gives an even surface pattern
- Versatile processing: suits hand layup, vacuum bagging, and resin infusion
Peel Ply vs. Release Film vs. Sanding
| Method | Surface Result | Bondable Without Sanding? | Best For |
|---|---|---|---|
| Nylon peel ply | Textured, clean | Yes | Secondary bonding, painting, fairing |
| Release film | Smooth, glossy | No | Smooth surfaces, flow control |
| Sanding cured resin | Abraded | Yes, after cleaning | Repairs without peel ply |
Choose peel ply when you plan to bond or finish the part later. However, use release film when you want a smooth, glossy surface.
Typical Applications
This peel ply suits any laminate that needs a clean surface after cure:
- Marine: hull, deck, and bulkhead laminates ready for bonding and painting
- Wind Energy: blade shells and bonded structural components
- Automotive & Motorsport: body panels and bonded structural parts
- Aerospace & UAV: skins and sandwich panels that need secondary bonds
- Construction & Infrastructure: GRP panels and structural components
- Tooling & Moulds: tool surfaces that need a keyed finish
- Repair & Restoration: laminate patches ready for fairing and paint
Technical Specifications
| Property | Specification |
|---|---|
| Product | Nylon peel ply |
| Areal Weight | 85 g/m² |
| Material | Nylon |
| Identification | Red stripe |
| Compatible Resins | Epoxy, Polyester, Vinyl Ester |
| Processing Methods | Hand Layup, Vacuum Bagging, Resin Infusion |
| Primary Use | Release layer and surface prep for bonding and painting |
| Sold As | Per linear metre |
Contact Enhanced Composites for roll pricing and current datasheets.
Frequently Asked Questions
What is peel ply used for?
Peel ply creates a clean, textured surface on a cured laminate. You remove it before bonding or painting, so you skip most of the sanding.
Why does this peel ply have a red stripe?
The stripe helps you identify the ply and confirm you have removed all of it from the part.
Can I use nylon peel ply with epoxy?
Yes. It releases cleanly from epoxy, and it also works with polyester and vinyl ester.
When should I remove peel ply?
Remove it just before bonding, painting, or fairing. Keeping it on protects the surface from dust and contamination until then.
Why Enhanced Composites
Enhanced Composites stocks peel ply and vacuum consumables as live inventory lines, with no minimum order. Additionally, the range covers bagging film, infusion mesh, sealant tape, and resins. So your full infusion kit can come from one trade account.
Bulk pricing available: email info@enhancedcomposites.com.au
Basalt Plain 200gsm - 1000mm wide 


