Silver Wire 2×2 Twill Carbon Fibre 200gsm 3K
Silver wire 2×2 twill carbon fibre 200gsm 3K is a woven 3k carbon fabric with fine silver coloured copper wire running through a 2×2 twill. The silver glints against the black carbon for a distinctive look. Use it as a visible top layer over a standard carbon or glass laminate.
At a glance
| Spec | Value |
|---|---|
| Fibre | 3k carbon with silver metallic thread |
| Weave | 2×2 twill |
| Areal weight | 200gsm (200g per m² dry) |
| Colour | Black with silver |
| Width | 1000mm (1m) |
| Resin compatibility | Epoxy, vinylester and polyester |
| Cured thickness per layer | About 0.25mm (indicative) |
Why choose silver wire twill carbon fibre?
Sparkle without paint – The silver thread catches the light in every direction, so a single surface layer gives a distinctive finish without paint or coatings.
Twill drape – The 2×2 twill conforms to curves and compound shapes better than plain weave, with less wrinkling.
Metallic thread in the weave – The silver thread is cosmetic and adds little structure. Cut with sharp shears and tape the cut line first, because the thread can fray at the edge. If the thread is metal, it conducts electricity, so keep it away from live parts. Confirm the thread material with your supplier.
Where silver wire twill carbon fibre fits
Buy this, or buy the neighbour
- Choose a plain 3k twill carbon for a classic black finish.
- Choose our Kevlar/carbon twills for colour and impact toughness.
- Choose a heavier cloth underneath to build thickness faster, with this as the surface layer.
Worked example
A 1m x 1m piece weighs about 200g dry. At roughly 50% fibre by weight, one finished layer is about 400g per m². Indicative only.
Using the fabric
Suits vacuum bagging, wet lay and resin infusion, or as a single skin on parts made to look like carbon fibre. Compatible with epoxy, vinylester and polyester, and epoxy is the usual choice for best performance. Wear gloves and a dust mask when cutting. See our adhesives and resins range.
Applications
Silver wire twill carbon fibre suits these jobs.
- Automotive: panels, trim and interior parts
- Marine: fittings and visible surfaces
- Sporting goods: bikes, boards and racing parts
- Furniture and panelling: feature surfaces
- Repairs and customising: visible cosmetic areas
Specifications
| Property | Specification |
|---|---|
| Fibre | 3k carbon with silver thread |
| Weave | 2×2 twill |
| Areal weight | 200gsm |
| Colour | Black/silver |
| Width | 1000mm |
| Resin compatibility | Epoxy, vinylester and polyester |
| Cured thickness per layer | About 0.25mm (indicative) |
Silver wire 2×2 twill carbon fibre: frequently asked questions
Does the silver thread affect strength?
It is cosmetic, so it adds little. The carbon carries the load.
Will the silver stay bright?
It typically shows through resin, but test a sample first, since resin can dull it.
Can I use it as the only layer?
As a single skin on cosmetic parts, yes. For structural parts, put it over a standard laminate.









