Peel ply with red stripe in 85 gsm is an excellent porous release fabric, that has been heat scoured and stabilized at high temperature making it easy to use with both polyester and epoxy resins. It is designed to work in resin infusion or hand lay-up processes allowing excess resin and air to flow through and eliminating voids in your parts. .
Our peel ply is free of any release agent or pollution and can be used directly on the surface of the part. After curing it peels quite easily without any residue or small pieces left on the part reducing the need for sanding or abrading when secondary bonding or gel coating is performed.. Red tracer yarn every 30mm helps to distinguish the peel ply from the cured laminate.
This high quality peel ply has been widely used in wind, marine and large parts production markets.
Features
- Peel ply easily strips off of cured laminate leaving a textured surface, reducing time spent hand finishing.
- Lower cost tightly woven fabric reduces material cost and is easier to remove than other peel plies.
- Red pin stripes make fabric more visible to minimize risk of leaving in place after cure.