Plain Fibreglass Cloth – 30gsm (0.88oz) – Ultralight

Ultra Light 30gsm Glass Cloth, Sold and priced per Metre. This fiberglass will wet out to a transparent, protective barrier, and can be used to prevent print-through of heavier fabrics underneath. It is often chosen for strip-built canoes and final layering over moldless designs.

Like other plain weaves, it delivers uniform strength in both horizontal and vertical directions, with warp and fill yarns at 0 and 90 degrees, respectively.

Great for building kayaks, canoes, surfboards, RC models

• Incredibly light woven glass fibre, only 30gsm,
• Just about as light a fabric as can be laminated by hand.
• Almost transparent and incredibly thin.
• Woven ‘E’ glass does not include any chemical binders (Suitable for any resin system including epoxy, polyester and vinylester)

TIPS:

• Orient this fabric so that yarns run parallel to expected loads.
• During lay-up, add layers at alternating 45-degree angles to maximize strength if is needed.
• Use with epoxy resin, polyester resin, or vinyl ester resin to produce composite parts of excellent strength, low weight, and great cosmetics.