Plain Fibreglass Cloth – 125gsm (3.7oz) – 685/762mm Width

Enhanced Composites 125 gsm Plain Weave Fiberglass Fabric is our most popular selection for use as a surface fabric, with enough body to be easily handled. This fiberglass will wet out to a transparent, protective barrier, and can be used to prevent print-through of heavier fabrics underneath. It is often chosen for strip-built canoes and final layering over moldless designs.

Like other plain weaves, it delivers uniform strength in both horizontal and vertical directions, with warp and fill yarns at 0 and 90 degrees, respectively.

Great for building kayaks, canoes, surfboards

TIPS:

• Orient this fabric so that yarns run parallel to expected loads.
• During lay-up, add layers at alternating 45-degree angles to maximize strength.
• Use with epoxy resin, polyester resin, or vinyl ester resin to produce composite parts of excellent strength, low weight, and great cosmetics.